Pavimento - Rovere Thermo Chiaro Rovere Thermo Chiaro - Longwood Antique

Aggiungi il prodotto ai tuoi preferiti Rimuovi il prodotto dai tuoi preferiti

Download materiale

Codice prodotto

Rovere Thermo Chiaro

Tipologia

Pavimento

Materiale

Parquet

Collezione

Decoro

Stili

Sensazione al tatto

Legno

Posa

Male and female / Permanent glued

Stonalizzato

Caratteristiche

Antistatico

Facile manutenzione

Facile pulizia

Immediatamente pedonabile

Lavabile

Non richiede ceratura

Posa facile e semplice

Utilizzi consigliati

Commerciale

Negozi

Showroom

Uffici

Ingresso

Formati disponibili

Piastra

codice formato: LWSPL189X1860X3

Larghezza

189 mm

Lunghezza

1860 mm

Spessore

14 mm

Confezione

2.1 m²

Peso

9.6 kg/m²

Longwood Antique

Unique collection of pre-finished, strapping parquet in fine wood, which adds a rustic look to any space. The long staves streamline and lighten the design thanks to the refinement of the lines: a parquet that lends itself to both floating laying and to gluing.

DISCOVER THE COLLECTION

Usage classes and classifications

Composition

Pre-finished, two-layer parquet flooring. Comes with on-trend rustic finishes with cracks and knots. Painted with 5 coats of 10% gloss acrylic paint and brushed with medium brushing.

• 4 mm solid oak layer
• 10 mm pine and poplar multilayered support

Presence of cut staves possible, up to 25% of the contents of each package.

Installation instructions

Before laying, it is necessary to check that the subfloor is smooth, flat, solid and dry. Glued installation is mandatory if laying on a heated subfloor in order to optimize its thermal transmission (minimum heat dispersion) without creating air bubbles between screed and parquet due to gluing. With a spreader of type recommended by adhesive manufacturer, a suitable adhesive such as two-component, polyurethane or silane glue etc is spread on the subfloor. Following appropriate processing, this creates what are known as "adhesion lines" so as to allow good contact - at least 70% - between the adhesive itself and the subfloor. It is essential that the glue is spread evenly; excess or insufficient glue can compromise correct installation.

Floating installation creates a single floor surface simply resting on the subfloor. It is made with pre-finished parquet staves fitted with tongue/groove interlock joints, glued together with vinyl adhesive. A vapour barrier is placed between the floor and the parquet in order to block any rising damp, as well as an additional mat to correct any flaws in the subfloor. In the case of heated or cooled subfloor, choosing a suitable mat is recommended.