Pavimento - Rovere Naturale 2312 2312 - Longwood Lounge
Longwood Lounge
The latest addition to the Longwood collections, Lounge adds to the choices of pre-finished 100% wooden parquet by adding another 6 beautiful oak decorations.
The reduced size of 130 x 1092 mm, combined with the micro-bevelling on all 4 sides, slims down the planks, making them particularly suitable for enhancing small and medium-sized spaces.
Their thickness is maintained at 14 mm. Interlocking is doing using the innovative patented 5G system which, in addition to guaranteeing great mechanical resistance, makes installation especially precise with considerable savings on installation times.
Floating installation of the floor requires layering of the mat and steam barrier, while glued installation requires the use of a specific adhesive.
Usage classes and classifications
Composition
3-layer pre-finished parquet. Micro-bevelled on 4 sides.
The surface layer in Oak offers two different finishes: oiled and painted. Natural brushed and oiled oak, code 2311, is the only one in the collection with an oiled finish, where natural oil penetrates into the pores of the wood, impregnating it against moisture and bringing out its natural characteristics.
Codes 2312/13/14/15/16, on the other hand, are matte varnished, with a coating made up of 5 layers of UV-hardened matte acrylic varnish, which protects the floor from abrasion, scratches and dirt, while the opacity emphasises the natural character of the wood and the depth of its design.
Finally, the brushing enhances the natural beauty of the wood grain and makes the structure perceptible to the touch.
• Noble oak top layer: ± 2.5 mm
• Spruce mid-layer: 9.5mm
• Spruce lower layer: 2mm
Each pack contains 7 slats, 1 of which is cut into 2 parts.
Installation instructions
Before laying it is necessary to check that the substrate is smooth, flat, compact and dry.
The glued installation is recommended in case there is the presence of heated underlay because it optimizes the thermal transmission (minimal heat loss) without creating, thanks to the bonding, air bubbles between the screed and the parquet.
With the help of a spatula of the type recommended by the glue manufacturer, a suitable adhesive is laid on the substrate, which after appropriate processing, creates the so-called adhesion lines so as to allow good contact, at least 70%, between the adhesive itself and the support. It is essential that the glue is spread evenly, the excess or lack of adhesive can compromise the correct installation.
The floating installation consists in recreating a single floor surface simply resting on the subfloor using the male/female joint, the two elements of which are glued together with vinyl glue.
A vapour barrier is placed between the floor and the parquet in order to block any rising humidity and an additional padding having the function of correcting any imperfections in the substrate.
In case of heated or cooled underlay, it is advisable to choose a suitable padding.
For cleaning and maintenance instructions, click here:
Contact us for any information about our products
