Rivestimento murale - Beige 5034 - Muravyl Extra
Muravyl Extra
Hygiene and versatility are elements not to be overlooked during the planning phase. The Muravyl Extra Heterogeneous wall cladding is the ideal solution for combining protection and practicality. A washable surface that resists growth of mould and bacteria without scrimping on aesthetics.
Usage classes and classifications
Practical vinyl wall cladding in heterogeneous PVC with high engineer features, supplied by the roll. Reinforced with fibreglass. Pure PVC surface (0.12 mm thick) to ensure ease of cleaning and prevent mould and bacteria formation.
1/2. Wear layer 0.12 mm
3. Decorative layer
4/5. Heterogeneous PVC layer 0.8mm
Surface must be flat, smooth, dry, firm, free of grease and cracks and maintain these characteristics over time. During installation, ambient temperature must be at least + 15°C and this temperature must be maintained for at least two days after work completion. Installation is carried out with easy-spread glue using suitable adhesives according to the manufacturers' instructions. The sheets must be laid inverted from one another.
Modern daily cleaning aims to reduce wet cleaning processes by replacing them with dry cleaning techniques. This makes the job more effective and easier for cleaning personnel and lessens environmental impact thanks to reduced chemical and water use.
Maintenance: Simply wipe with a sponge soaked in clean water. A soft brush may also be used.
Warning: do not use abrasive cloths. Clean with a soft brush and a neutral Evo detergent (pH 6-8) diluted in hot water. Rinse with clean water. A thorough clean using a detergent diluted in water, followed by a rinse with clean water, is advised every so often.
Contact us for any information about our products
